Parameters - Siemens SINAMICS IOP-2 Operating Instructions Manual

7.3

Parameters

Parameter menu
For information on IOP-2 compatibility, see
The parameter menu allows the user extensive functionality
and access to all the converter parameters. When this option
is selected the user is given the opportunity to perform
parameter orientated functions grouped in the following
manner:
• Parameter groups
• Search by number
• My parameters
• Changed parameters
• Parameter filter
Fast scroll
When searching through any large parameter list, the Fast
scroll function will automatically start when the user slides
their finger around the Sensor Control Field in a fast motion.
A large blue box will appear on the screen, showing the
current parameter number, with each scroll the number will
increase by 100. When the user stops scrolling, the parameter
number nearest to the number displayed will be selected.
Parameter groups
All parameters
This option allows the user access to the individual parameters of the converter. The default
filter is "Standard" which allows the user access to the most frequently used parameters.
Commissioning
This screen displays a complete listing of all the parameters required for quick
commissioning. The parameters are listed in numerical order and can be accessed to either
confirm the set values or modified should there be a need to fine tune the application or
correct any errors in the parameter values.
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 04/2017, FW V2.0, A5E39549448B AA
Introduction (Page 11).
Menu
7.3 Parameters
45