Initial Set-Up - Siemens SINAMICS IOP-2 Operating Instructions Manual

Installation

4.2 Initial set-up

4.2 Initial set-up
Initial set-up sequence
Once the IOP-2 is fitted and powered-up it will automatically detect the type of Control Unit
and Power Module to which it has been fitted. On first-time use, the IOP-2 automatically
displays the option to select the default language and allow the time and date to be set (if the
Control Unit to which the IOP-2 is fitted has a real-time clock). The procedure is outlined
below.
Splash screen is displayed
Status screen is displayed
Note
The IOP-2 is delivered with all available languages and wizards, although the number of
wizards will depend on the type of Control Unit that is being used. For information on
Firmware upgrades, please see
The status screen can be reconfigured to show a number of different views and types of
values; these can be configured using the "Status Screen Wizard" in the "Extras" menu, see
20
Extras Menu (Page 51).
Select the required language
Firmware upgrade (Page 25).
Operating Instructions, 04/2017, FW V2.0, A5E39549448B AA
Select the required wizard or
press ESC
Intelligent Operating Panel 2 (IOP-2)