Siemens SINAMICS IOP-2 Operating Instructions Manual page 47

Search by number
This option allows the user to search for a specific parameter
number.
If the parameter number does not exist, the screen will display
a choice between "Select a new number" or "Go to the
nearest parameter number".
My parameters
This option allows the user to select the parameters that they
wish to list. The user is presented with a list of parameters that
can be selected. Once selected - only those parameters are
displayed when the "My Parameters" option is selected. There
are additional options that allow the user to manage their list
of parameters.
Copying the "My Parameters" list to another IOP-2
When a "My Parameters" list is created, it saves the lists in the
config.bin file on the IOP-2.
To copy the config.bin, the following procedure should be
performed:
1. Connect the IOP-2 via the USB to your PC (the IOP-2 will
enter "Mass Storage" mode.
2. Navigate to the config folder (shown in the screenshot and
highlighted in red).
3. Copy the config.bin file to a suitable location on your PC.
4. Disconnect the IOP-2 and connect a new IOP-2 and copy
the config.bin file to the new IOP-2.
Changed parameters
When the "Changed parameters" option is selected the IOP-2
will search the converter parameter list for all the parameters
that have had their values changed from the factory default
settings.
Once the search is complete, the screen will present a list of
all parameters that have changed values.
The individual parameters can be accessed so that their
current values can be displayed and modified if necessary.
Intelligent Operating Panel 2 (IOP-2)
Operating Instructions, 04/2017, FW V2.0, A5E39549448B AA
Menu
7.3 Parameters
47