Bowflex BXE216 Assembly & Owners Manual page 51

(machine turns on and oper-
ates)
turns on and operates)
Console shuts off (enters sleep
mode) while in use
Fan will not turn on or will not
turn off
Fan will not turn on, but Console
operates
Things to Check
Check Console
Check data cable integrity
orientation
connection
Check Servo Motor (requires
shroud removal)
Check Console
Incline handlebar connection
(requires shroud removal)
(requires shroud removal)
Check electrical (wall) outlet
Check connection at front of unit
Check data cable integrity
Check data cable
Check magnet position (requires
shroud removal)
Check Speed Sensor (requires
shroud removal)
Check data cable integrity
Check data cable
Check for blockage of fan
Check surface under unit
Assembly / Owner's Manual
cable.
nections. Small latch on connector should line up and snap into place.
and undamaged.
Servo Motor if not functioning properly.
If the above steps do not resolve the problem, contact Customer Care for
further assistance.
and undamaged.
cable.
If the above steps do not resolve the problem, contact Customer Care for
further assistance.
Make sure unit is plugged into a functioning wall outlet.
tion at unit if either are damaged.
cable.
connector should line up and snap into place.
Magnet should be in place on pulley.
Speed sensor should be aligned with magnet and connected to data cable.
the connecting wire.
connector should line up and snap into place.
unable to remove blockage.
Move machine to level area.
51
Solution
-
-