Bowflex SelectTech BD552 Unpacking Instructions Manual

®
If you have questions, please contact your local distributor. To find your local distributor, go to: www.bowflexinternational.com
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all Warnings on this machine.
The following procedure will make it easier to remove
your SelectTech dumbbell from its packaging.
®
The dumbbell is heavy. Ask for assistance if necessary.
• Open the top flaps of the shipping box and remove the
upper section of foam. See 1.
• Carefully lay the shipping box on its side so that the
base of the dumbbell faces down. See 2.
• Reach inside the box with both hands and locate the
handles on each end of the base. See 3.
• Using the handles, carefully pull the dumbbell out of the
foam and place on floor.
• You may now remove the plastic bag. See 4.
When moving the dumbbell assembly, use the handles that
are molded into each end of the base.
1
3
Nautilus, Inc., www.nautilusinternational.com | Printed in China | © 2012 Nautilus, Inc.
SelectTech BD552 International Dumbbell Unpacking Instructions
®
®
Note: If the dumbbell assembly is to be used for retail
display, leave the reusable strap intact. Otherwise,
remove the strap before use.
Restraint strap
In a retail display setting, the restraint strap allows enough
movement for demonstration, but prevents damage to
the unit and helps to avoid dropping and/or misuse by
consumers.
2
4
1
8000770.051517.C