Safety Precautions; Specifications - Kirby Morgan 200-120 User Manual

Balanced scuba regulator

Table of Contents

Safety Precautions

4. Dry the dust cap with a towel or other lint-free cloth. While

you may use air from your tank valve to blow the water off the

dust cap, you run the risk of blowing out the dust cap O-ring and

losing it.

5. Place the dust cap over the first stage inlet fitting and seal

it securely in place by tightening down the yoke screw. Do not

overtighten the cap.

Safety Precautions

Use only genuine Kirby Morgan replacement parts.

Unlike many of the other Kirby Morgan products, the First

Stage should not be used with oxygen-enriched gas mix-

tures greater than 23% oxygen.

NOTE: The second stage regulator can be used with 50% oxygen,

provided it's kept clean.

To ensure the best possible regulator performance and to avoid

damage to regulator components, use only KMDSI original fac-

tory replacement parts.

To avoid damage to regulator components, only the correct size

and type of tools should be used. The use of adjustable wrenches

should be avoided whenever possible to avoid damage to soft

brass parts.

Should you encounter technical difficulties in servicing a Kirby

Morgan regulator, please contact Kirby Morgan or Dive Lab di-

rectly for assistance.

First Stage Type: Balance Piston

B WARNING

Table of Contents

200-125 Balanced scuba regulator