Kirby Morgan KMB 18 Quick Start Manual

DAILY MASK AND EMERGENCY GAS SYSTEM
THIS DAILY SET-UP AND FUNCTIONAL CHECKLIST SHOULD BE COMPLETED PRIOR TO COMMENCEMENT OF DAILY
DIVING OPERATIONS AND AT LEAST EVERY 24 HOURS IF IN CONTINUOUS USE.
WARNING:
These are recommended minimum checks when using Kirby Morgan KMB
18/28 Band Masks. Additional checks may be required as dictated by the
conditions and tasks being performed. Failure to perform in-water checks
may result in serious injury or death.
NOTE: Mask(s) being used in extreme environments will require more frequent inspection.
NOTE: During removal of components for inspection, O-rings and other consumable items may
be reused, providing they are clean and a visual inspection does not reveal any damage
or deterioration.
NOTE: Perform the Side Block/Demand Regulator inspection procedures with gas supplies not
connected to the Side Block. Attach the gas supply at Step 5 of the "Side
Block/Demand Regulator" inspection procedure.
NOTE: Steps 3(a) - 3(e) use the EGS for setting up and checking the Mask's systems. For a
proper check of the Demand Regulator adjustment, the First Stage Regulator must have
an intermediate supply pressure output between 135 – 150 psig (9.3 – 10.3 bar). The
First Stage Bleed/Relief Valve should be set between 180 - 200 psig (12.4 – 13.8 bar).
Do not attach the Umbilical until Step 6.
Date:
Mask Serial #:
Associated Equipment Serial #(s):
Technician
(print name)
Kirby Morgan, SuperLite, Band Mask, KMB Band Mask, EXO, SuperMask, SuperFlow, and Rex are all registered trademarks of
Kirby Morgan Dive Systems, Inc. Use of these terms to describe products that are not manufactured by KMDSI is not permitted without
written permission from KMDSI.
© Copyright 1970-2017 Kirby Morgan Dive Systems, Inc. All rights reserved. KMDSI manuals, checklists and technical and training
information is made available for the express use of owner/user of this Kirby Morgan products. No part of this material may be reproduced,
stored in any retrieval system, or transmitted, or used in any form or by any means, whether graphic, electronic, mechanical, photocopy, or
otherwise by technology known or unknown, without the prior written permission of Kirby Morgan Dive Systems, Inc
KMB 18/28 (BAND MASK)
SET-UP AND FUNCTIONAL CHECKLISTS
APPENDIX A2.3
:
Copyright 2003-2017, Dive Lab®., Inc. All rights reserved. TechTrnG 03101
07-20-17