Scheduled Maintenance - Kirby Morgan 200-120 User Manual

first stage sensing holes to help displace water. This is helpful
if the regulator is to be packed for travel.
6. Screw the second stage regulator adjustment knob all the way
out, away from the second stage body. This will lengthen the
life of the regulator seat considerably.
7. Insure the regulator is completely dry before storing. Store
only in a clean, cool, dry place, away from direct light.
Never store the Regulator while still connected to a
SCUBA tank.
DO NOT carry a SCUBA Cylinder by the Regulator or
Hose. This abuse will lead to damage of the Regulator or
Hose failure. Hose failure can result in personal injury.
DO NOT use cleaning solvents on any parts or compo-
nents of this Regulator. The use of solvents may lead to
failure of the Regulator parts.
NEVER pressurize the First Stage Regulator without hav-
ing a Second Stage attached.

Scheduled Maintenance

Do not assume that a Regulator is in good working order because
of infrequent use. Prolonged or improper storage can result in O-
ring deterioration or internal corrosion that may result in poor
performance.
1. The minimum maintenance suggested for all regulators is an
annual inspection / soft goods overhaul by a qualified KMDSI
technician. However, regulators that are used more than 20
© MMXVII Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 170814005
B CAUTION
B WARNING
B WARNING
B WARNING
Scheduled Maintenance
31