Download Print this page

Important Safety Information - Kirby Morgan EXO Full-Face Mask Operation & Maintenance Manual

Regulator full face mask

Advertisement

EXO Full-Face Mask Manual

IMPORTANT SAFETy INFORMATION

This EXO Full Face Mask is intended for use by trained divers who have successfully completed a recognized training
course in the use of a full face mask, and if used in the surface supplied mode, an approved surface supplied diving
course.
Read this manual before using or maintaining the mask, even if you have experience with other full-face masks. If you
Follow all the instructions in this manual carefully and heed all safety precautions. Improper
use of this diving mask could result in serious injury or death.
Kirby Morgan Dive Systems, Inc. (KMDSI) warns all divers who use the EXO Full Face Mask
to use only KMDSI original spare parts from a KMDSI authorized dealer. Although other
parts, O-rings and fittings may not to be manufactured to the same standards maintained
by KMDSI. The use of any spares other than KMDSI original parts may lead to equipment
failure and accidents.
Diving in an environment that is chemically, biologically, or radiologically contaminated is
extremely hazardous. Although the EXO Full Face Mask may be adapted for use in some
contaminated environments, special training, equipment, and procedures are necessary.
Do not dive in a contaminated environment unless you have been thoroughly trained and
equipped for this type of diving.
Diving is a life threatening occupation. Even if you do everything right you can still be killed
or injured. None of the models of full-face masks can prevent accidents, injuries or death
due to improper training, lack of health, improper supervision, improper job requirements,
improper maintenance or acts of God.
DO NOT dive this mask in water containing high concentrations of petroleum based chemi-
cals. DO NOT use any chemical locking liquids anywhere on the mask. DO NOT use any
type of aerosol sprays on the mask. These chemicals can attack, damage, and compromise
the structural integrity of the plastic parts on the mask . Clean the mask using only mild
soap and water.
have purchased the mask new from a dealer, be sure to send in the warranty registration card so we may keep you in-
formed regarding any safety notices that affect this product. If you resell or loan this mask to another diver, be sure this
manual accompanies the mask and that the person reads and understands the manual.
This manual is supplied to the original purchaser of this mask. If you have any questions about the use of the mask or
you need another copy of this manual, Part Number 100-030, contact KMDSI. If you have any questions regarding the
use, maintenance, or operation of this mask, contact KMDSI at (805) 928-7772
VIII
WARNING
WARNING
WARNING
WARNING
WARNING
© Copyright 1970-2009 Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 080115002

Advertisement

loading

This manual is also suitable for:

Exo originalExo balanced