General Precautions And Warnings - Kirby Morgan 200-120 User Manual

Dealer, your regulator assembly is covered by KMDSI's Limited
Warranty. Be sure to read and fill out the warranty card com-
pletely and return the bottom portion within ten (10) days of
purchase. Also save your sales receipt. A copy of your receipt must
be presented whenever obtaining warranty service.
Perhaps more than any other piece of diving equipment, your
regulator's function and performance relies greatly on the care
and maintenance it will receive, in addition to regularly scheduled
dealer service. Before you dive with your new Kirby Morgan regu-
lator, it is important to read this guide in its entirety; to become
familiar with its features, as well as the correct procedures for
setup, pre-dive inspection, and post-dive maintenance.

General Precautions and Warnings

Before using this regulator assembly, you must have successfully
received training and certification in the technique of SCUBA
diving from a recognized certification agency (or any Military or
government operated diving school).
Use of this equipment by a person who is not certified by a recog-
nized agency shall render all warranties, express or implied, null
and void. Use of SCUBA equipment by uncertified, or untrained
persons, is dangerous and can result in serious injury or death.
Never lubricate any part of the regulator or cylinder valve
with any lubricant. Lubrication must only be performed by
a KMDSI factory trained technician. Improper lubrication
can lead to regulator malfunction. Drowning can result.
Do not use the regulator first stage as a carrying
handle when lifting or transporting the cylinder.
Always lift the cylinder by the cylinder valve handle
without the regulator attached. The regulator can
be damaged if you use it to lift the cylinder.
© MMXVII Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 170814005
B WARNING
B CAUTION
General Precautions and Warnings
17