Record Settings; A Setting The Resolution; B Setting A Channel - Sanyo DSR-2004 Instruction Manual

RECORD settings

Press the MENU button and enter the password. (P24)
The MAIN MENU is displayed, select "RECORD" using the
control button ({|}~).
MAIN MENU
LIVE
NETWORK
RECORD
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
RECORDING
MOTION ZONE
MOTION SENSITIVITY
SENSOR TYPE
PRE RECORD
POST EVENT RECORD
ALARM
ALARM DURATION
AUDIO
TIMER SET
27
RECORD SYSTEM
HDD SET SERVICE
QUAD
CH1
1 f/s
NORMAL
CONTINUOUS
FULL ZONE
7
---
ON
5 SECONDS
OFF
5 SECONDS
OFF
A
Setting the RESOLUTION
To set the resolution for the recordings.
Select RESOLUTION using the control button ({|) and
select a setting using the control button (}~).
FULL: When recording single-screen
• NTSC: 720 × 480
QUAD: When recording quad-screen
• NTSC: 360 × 240
B
Setting a CHANNEL
To set the recording settings of each channel.
Select an item for each setting using the control button
({|) and select a setting value using the control button
(}~).
● Setting a CHANNEL
Select CHANNEL and select a channel.
CH1/CH2/CH3/CH4
● Setting the FRAME RATE (Unit: FPS)
Select FRAME RATE and select a value.
NTSC: OFF/1/2/ ... 29/30 (f/s)
PAL: OFF/1/2/ ... 24/25 (f/s)
The FRAME RATE setting represents the total frame rate
of each channel. For example, if the frame rate is set to
25 (30) for channel 1 it cannot be set differently for other
channels.
If FULL is selected under resolution setting:
NTSC: It is possible to select up to a total of 30 frames for all
channels
PAL: It is possible to select up to a total of 25 frames for all
channels
If QUAD is selected under resolution setting:
NTSC: It is possible to select up to a total of 120 frames for
all channels
PAL: It is possible to select up to a total of 100 frames for all
channels
● Setting the QUALITY
To select QUALITY and select the video quality.
Selections: NORMAL/FINE/BASIC
● Setting the RECORDING
To select RECORDING and select the recording mode.
CONTINUOUS (P13)
Recording is performed while this unit is turned on.
BY MOTION recording (P13)
Recording is performed as soon as the internal motion sensor
of this unit reacts.
BY EXT. SENSOR (P14)
Recording is performed as soon as a sensor device
connected to the external sensor (SENSOR) terminal device
of this unit reacts.
BY SCHEDULE (P15)
Recording is performed daily during the set time slot set on
the SCHEDULE screen in the recording settings.
• PAL: 720 × 576
• PAL: 360 × 288