J Setting A Remote Controller Id - Sanyo DSR-2004 Instruction Manual

SYSTEM settings
J
Setting a REMOTE CONTROLLER ID
Allows to set an ID number on the supplied remote control
and use it as an exclusive remote control when multiple units
are connected.
The initial value is set to "0" and the remote control display is
displayed on the monitor, remote operations are always
available.
SYSTEM
DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
NETWORK PASSWORD
DATE FORMAT
CLOCK SET
PTZ CONTROL
LANGUAGE
REMOTE CONTROLLER ID
D.S.T./SUMMER TIME
Remote control display
REC/STOP
1
34
4
7
34
ID
DVR
YYYY/MM/DD
ENGLISH
0
OFF
2% 2% 2006/07/14 08:06:09
CH1 R
2 3
5 6
8 9
0
SKIP
b Operating this unit via the remote controller ID
(Example: 4)
1
Select REMOTE CONTROLLER ID using the control
button ({|) and select the ID number (Example: 4)
using the control button (}~).
Selection: 1/2/ ... 8/9
2
Press the EXIT/STOP button repeatedly to return to
the live screen.
DVR ID
DESCRIPTION
LOAD DEFAULT
ADMIN PASSWORD
NETWORK PASSWORD
DATE FORMAT
CLOCK SET
PTZ CONTROL
LANGUAGE
REMOTE CONTROLLER ID
D.S.T./SUMMER TIME
3
Press the ID button of the remote control and press
a numeric button except 4.
The remote control display of the live screen
disappears, it is no longer possible to access the
numeric buttons.
4
Press the ID button of the remote control and press
4 of the numeric button.
The remote control display reappears, the ID number 4
set in the SYSTEM settings allows the operation of this
unit.
To return to the initial value (0), press the ID button and
press "0". The unit can be operated regardless of the ID
number set in the SYSTEM settings.
SYSTEM
DVR
YYYY/MM/DD
ENGLISH
4
OFF
2% 2% 2006/07/14 08:06:09
2% 2% 2006/07/14 08:06:09
32