D Event Log Search, View, Save (Log View); E Record Settings (Record) - Sanyo DSR-2004 Instruction Manual

Setup menu settings
D
Event log search, view, save (Log View)
Event information can be searched and events can be saved
to a PC.
1
2
3
5
1
Specify the folder to be searched using [Path].
2
Set the start point of the search range in [From].
If the checkbox [First] is checked, it is automatically set
to the first date and time in the folder.
3
Set the end point of the search range in [To].
If the checkbox [Last] is checked, it is automatically set
to the newest date and time in the folder.
4
Click [Find].
The event information of the specified range is
displayed as a list in the log list.
5
To save the displayed log list as text, click [Save].
To change the destination folder displayed in [Path],
click [Browse] and select a new destination folder.
Once the above operations are complete, click [OK] and close
the screen.
E
Record settings (Record)
Sets the recording conditions while in network operations.
Recorded video is saved on the hard disk of the PC.
4
1 Record Condition
<Recording mode>
Select a recording mode using the radio button.
• Always:
Recording is performed when the recording button on
the operation panel is set to ON
• Event:
When the recording button on the operation panel is set
to ON, recording is on standby and recording is
performed when specified events occur.
<Automatic recording settings (Auto Record)>
If the checkbox is checked, the recording button on the
operation panel is always fixed to ON and video is
automatically recorded in the selected recording mode
when the unit is connected to the network.
[Auto Record] settings become valid as soon as the unit
has been disconnected and reconnected.
2 Event
If [Record Condition] is set to "Event", set the following
conditions.
<Event types>
• Motion:
When this unit performs a BY MOTION recording the
event is also recorded on the PC.
• Alarm:
When an alarm signal is input into the external sensor
terminal situated on the back panel of this unit, the
event is recorded on the PC.
<Recording duration>
• Duration (Unit: seconds)
3 Channel
Specify the camera to be recorded using the checkbox.
Memo: Using [All] of the checkbox, the user can check or
uncheck all the cameras.
Click [OK] once the above settings are complete.
The content of the settings are confirmed and saved.
1
2
3
52