B Backing Up Dvr Recorded Video - Sanyo DSR-2004 Instruction Manual

Search mode operations
B
Backing up DVR recorded video
DVR (this unit) recorded video can be backed up on the hard
disk of a PC in AVI format.
Search the recorded video by following the procedure below,
specify the video range to be backed up and execute a back
up.
Refer to steps 1-3 of "Searching and playing recorded
video (P48)".
1
Specify the search destination (DVR/PC).
Set to "DVR".
2
Click the calendar and specify the date of the video
to be searched.
3
Confirms the time slot with recorded video using
the time scale.
4
Specify the backup start point.
Move the slide knob of the time scale to the start point
and click [START POINT].
5
Specify the backup end point.
Move the slide knob of the time scale to the end point
and click [END POINT].
A dark green line is displayed on the specified video
range.
Memo: To undo the specified video range, re-click [START
POINT].
49
Click [START POINT] Click [START POINT]
Click [END POINT]
6
Click [BACKUP].
Confirm the backup content of the backup using the
[AVI Backup] dialog.
End time
1 Start time/End time:
Can be modified using the spin buttons.
2 File Path:
The path set in the general settings screen in the set
up menu is displayed. (P50)
3 Channel:
The channels numbers with recorded video are
displayed.
7
Click [OK].
The specified recorded video range is backed up on the
PC. The backup progress is displayed in the progress
gauge of the dialog.
Memo: • Destination folder name
Input the date information of the first image of the
video.
• Saved file name
(Camera channel number) + time information of the
first image
Example:
[CH1] 08_30_08 = Recorded video from camera 1
at 08h30m08s
• Video is backed up in the AVI format and can be
played using video playback software compatible
with the AVI format such as Windows Media Player.
If the video cannot be played with a standard AVI
software, install Codec (FFDShow) from the
supplied CD-ROM.
1
2
3