Dby Ext. Sensor Recording - Sanyo DSR-2004 Instruction Manual

Recording
D
BY EXT. SENSOR recording
An external sensor can be connected to each channel.
1
Connecting an external switch to an external
sensor terminal.
(Sold separately)
1
2
Set the following items using the control button
({|}~).
• RESOLUTION
• CHANNEL
3
Select RECORDING using the control button ({|)
and select BY EXT. SENSOR using the control
button (}~).
RECORD
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
RECORDING
MOTION ZONE
MOTION SENSITIVITY
SENSOR TYPE
PRE RECORD
POST EVENT RECORD
ALARM
ALARM DURATION
AUDIO
TIMER SET
4
Select SENSOR TYPE using the control button
({|) and select detection mode using the control
button (}~).
5
Select PRE RECORD using the control button ({|)
and select the pre recording as necessary using the
control button (}~).
6
Select POST EVENT RECORD using the control
button ({|) and select the recording time as
necessary using the control button (}~).
Selections: 2 - 30 SECONDS
7
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live screen.
Monitor
Camera
(Sold separately)
MENU AUTO MODE POWER
2 3 4 OUT
• FRAME RATE
• QUALITY
QUAD
CH1
1 f/s
NORMAL
BY EXT.SENSOR
FULL ZONE
7
---
ON
5 SECONDS
OFF
5 SECONDS
OFF
b Output settings at the time of external switch
operation
When a motion sensor of this unit or an external sensor is
activated, a relay signal is output to the external alarm device
connected to the ALARM OUT terminal. It is normally open.
1
Connecting an external alarm to the OUT terminal
of the external sensor.
Camera
(Sold separately)
Maximum current:
0.5A/125V AC
Maximum voltage:
1A/30V DC
2
Select ALARM using the control button ({|) and
select ON using the control button (}~).
3
Select ALARM DURATION using the control button
({|) and select the alarm signal output duration
using the control button (}~).
Selections: 1 - 60 SECONDS
RECORD
RESOLUTION
CHANNEL
FRAME RATE
QUALITY
RECORDING
MOTION ZONE
MOTION SENSITIVITY
SENSOR TYPE
PRE RECORD
POST EVENT RECORD
ALARM
ALARM DURATION
AUDIO
TIMER SET
4
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live screen.
Monitor
(Sold separately)
MENU AUTO MODE POWER
1 2 3 4 OUT
Power
source
QUAD
CH1
1 f/s
NORMAL
BY EXT.SENSOR
FULL ZONE
7
---
ON
5 SECONDS
OFF
5 SECONDS
OFF
14