Names And Functions Of Parts - Sanyo DSR-2004 Instruction Manual

Names and functions of parts

Front panel
1
8
There is no power switch on this unit.
1 Power indicator (POWER)
The power indicator blinks when the supplied AC adapter
is connected.
2 Recording indicator (CH 1/CH 2/CH 3/CH 4)
The indicator blinks when a channel is recording.
3 LAN indicator (LAN)
The indicator blinks when the unit is connected and used
through the LAN cable.
4 Alarm indicator (ALARM)
The indicator blinks when an alarm recording occurs.
5 Hard disk drive indicator (HDD)
The indicator blinks when the hard disk is being accessed.
6 Menu button (MENU) (P7/24)
Displays the settings menu screen and switches to setting
mode.
7 Exit/Stop button (EXIT/STOP) (P13)
During settings: Returns to the previous screen.
During playback: Interrupts playback operation.
8 USB terminal (USB) (Exclusively for 2.0) (P21)
Connect the USB memory. Video can be saved.
L Control button
A
C
B
3
2
9 F
Playback in progress
Skip button (SKIP):
A
E
The player jumps one minute forward.
Replay button (REPLAY):
B
The player jumps one minute
backward.
button:
D
The player fast rewinds.
C
button:
The player fast-forwards.
D
button:
The player displays a still image.
E
Plays the image selected during the
image search operation.
3 4 5
G H I J K
9 Camera selection 1 - 4 buttons (P7)
The video of each live is displayed on single-screen.
F Record/Stop button (REC/STOP) (P12)
Starts/Stops the recording of the monitored live image
displayed.
G Automatic camera scrolling button (SEQ) (P10)
Automatically switches through and displays the images of
each live.
H Quad-screen display button (QUAD) (P10)
Displays a quad-screen.
I Mark/Copy button (MARK/COPY) (P21)
Switches to image saving mode.
J Search button (SEARCH) (P18)
Switches to recorded-images searching mode.
K Pan/Tilt/Zoom button (PTZ) (P11)
Switches the dome camera connected to the RS 422/485
terminal to Pan/Tilt/Zoom/Focus mode.
:
Moves the cursor upward.
:
Moves the cursor downward.
:
Changes the settings value or moves
the cursor to the left.
:
Changes the settings value or moves
the cursor to the right.
ENTER :
Sets the selected item or displays the
settings screen.
6 7
L
Setting in progress
(Cursor operation)