D Setting The Network Type - Sanyo DSR-2004 Instruction Manual

NETWORK settings
D
Setting the NETWORK TYPE
Select NETWORK TYPE to be connected, and set each
setting. Consult the network manager for all necessary
information.
1
Select NETWORK TYPE using the control button
({|).
2
Select a type using the control button ({|).
• ADSL • LAN
b If selecting DHCP
Information, such as the IP address, is automatically
distributed and does not therefore need to be set.
b If selecting ADSL
1 Select ID using the control button ({|) and press
the ENTER button.
The ADSL ID input screen is displayed.
2 Change the ID number using the control button
({|), move the cursor to the right using the
control button (}~) and repeat the operation, and
then press the ENTER button.
The screen returns to the NETWORK screen.
3 Select PASSWORD using the control button ({|)
and press the ENTER button.
The ADSL PASS input screen is displayed.
NETWORK
PORT 5445
CLIENT ACCESS ON
BANDWIDTH SAVING ON
NETWORK TYPE ADSL
ID
PASSWORD
DDNS OFF
SEND E-MAIL
4 Display "A: Ex" using the control button ({|),
move to the right using the control button (}~)
and repeat the operation, and then press the
ENTER button
The screen returns to the NETWORK screen.
5 Press the EXIT/STOP button.
The APPLY NETWORK ADDRESS screen is displayed.
6 Select "CONFIRM" using the control button (}~)
and press the ENTER button.
Once the settings are complete, restart the unit. The
screen switches to live video.
APPLY NETWORK ADDRESS
CANCEL
ADSL ID
1 2 3 4 5
- - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
ADSL PASS
A B C D E
- - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - -
CONFIRM
34