Automatic Operation; Thermostatic Mode; Program Mode - Stanley Cara Installation And Operating Instructions Manual

AUTOMATIC OPERATION

The Cara Stove has three automatic operation
modes:
A. Thermostatic Mode - The room temperature
is compared to the set temperature and the
flame height is automatically adjusted until
the set temperature is reached.
B. Program Mode - The stove operates for a set
period of time (Two ON/OFF periods per
day).
C. Eco Mode - The Flame Height modulates
from High to Low Flame settings. If the room
temperature is less than the set temperature,
the flame height is maintained at the High
setting. If the room temperature is greater
than the set temperature, the flame height is
maintained at the Low setting. Each cycle
will last approximately 20 minutes.

Thermostatic Mode

To activate the Thermostatic Mode, press the
Temperature Button. The Temperature Symbol will
be displayed , the preset temperature will be dis-
played briefly followed by the current room
temperature (see Fig 36).
To change the preset temperature, press and hold
the Temperature Button until the Temperature
Symbol is displayed and the preset temperature
flashes (see Fig 37). Press the Up Arrow Button &
Down Arrow Button to select the desired tempera-
ture setting and press & hold the Temperature
Button to confirm the setting until the display returns
to Thermostatic Mode.
To deactivate the Thermostatic Mode & return to
Manual Mode, press the Temperature Button until
the Temperature Symbol disappears.

Program Mode

The following procedure should be used when
setting the Temperature and Timer Program:
1. To set the temperature, press & hold the
Program Button
Mode display flashes ON & the set
temperature
Program Mode display flashes OFF & the set
temperature flashes (see Fig 38).
2. Press the Up Arrow Button & Down Arrow
Button to select the desired temperature
setting.
3. Press the Program Button to confirm the
temperature setting.
until the Program
is displayed. Then
Fig.36
Fig.37
Fig.38
Fig.39
the
21