Door Handle - Stanley Cara Installation And Operating Instructions Manual

1. Remove the firebox glass panel as described
in the Installing the Stove section.
2. Scatter the bags of embers over the top of
the burners as shown in Fig 19 keeping the
pilot area & second thermocouple clear.
3. Position Logs S1, S2 & S3 as shown in
Figure 20.
4. Position Logs S4 & S5 as shown in Figure
21.
5. Position Logs S6 & S7 as shown in Figure
22.
6. Position the Firecone/Log S8 as shown in
Figure 23.
7. Check the appliance for Pilot Ignition and
cross lighting ensuring that no material is
impinging the operation of the Pilot.
8. Refit the firebox glass panel.
Fig.18
Fig.19
Fig.20
Fig.21
Fig.22
Fig.23
Pilot & Cross
Light kept clear
2nd Thermocouple
kept clear

DOOR HANDLE

The stove is supplied with a detachable door handle.
To open the door, insert the silver end of the handle
into the door latch on the fire door, turn the handle
clockwise and pull the door towards you. To close
the door, insert the handle into the door latch as
before, push the door closed, turn the handle anti-
Log S1
clockwise to engage the door catch and remove the
door handle.
Log S2
Alternatively the door handle supplied can be fixed
Log S3
in place. To fix the door handle remove the spigot
from the end and thread the handle directly into the
door latch.
14
Log S5
Log S4
Log S7
Log S6
Fircone /
Log S8