Additional Light Activation - MOTO GUZZI California 1400 Custom Instruction Manual

NOTE
INSERT THE BULB IN THE BULB HOLDER SO THAT THE TWO GUIDING PINS
COINCIDE WITH THEIR GUIDES ON THE BULB HOLDER.
•
Install a bulb of the same type adequately.
NOTE
IF THE BULB HOLDER «4» IS STICKS OUT ITS FITTING, INSERT IT AGAIN COR-
RECTLY BY MATCHING THE BULB HOLDER RADIAL OPENING WITH THE
SCREW SEAT.

Additional light activation (04_25)

To use the supplementary headlamps:
•
Set the ignition switch in the direction of the fog light symbol, as shown in the
figure.
04_25
97