Table of Contents
Advertisement
NOTE
EVERY TIME THE SET VALUE IS MODIFIED, THE NUMERIC SYMBOL IS DIS-
PLAYED IN NEGATIVE (BLINKS) FOR 2 SECONDS BEFORE BEING CONFIRMED
To deactivate the system, from value "1", turn the selector to the left, holding it down,
until the value "-" appears.
The MGCT warning light will be on steady.
To exit the MGCT function short press the selector or set off on the motorcycle.
NOTE
THE FIRST TIME THE BATTERY IS CONNECTED THE MGCT WARNING LIGHT
IS ON STEAD (SYSTEM NOT ACTIVE)
02_27
NOTE
ONCE THE MOTORCYCLE IGNITION SWITCH IS TURNED OFF, AT THE NEXT
START UP THE MGCT SYSTEM MAINTAINS THE PREVIOUSLY SELECTED SET-
TINGS.
Advanced functions (02_28, 02_29, 02_30, 02_31, 02_32, 02_33,
02_34)
MENU
The function can be selected only with the vehicle at a standstill. It sets the parameter
display mode in the different configurations.
To access the MENU function:
with the MENU function displayed, hold down the selector on MENU.
The configuration menu options are:
02_28
- EXIT
- BACKLIGHTING
35
Advertisement
Table of Contents
