Table of Contents
Advertisement
Clutch lever adjustment (03_07)
Adjust the distance between the lever end and the hand grip by turning the set screw.
To adjust: push the control lever forward and turn the set screw until the arrow points
at the desired number.
03_07
Running in
Running in is essential to ensure the durability of the vehicle. During the first 1000 Km
(621.37 mi), observe the following rules to ensure the reliability and performance of
the vehicle throughout its lifetime:
•
Avoid full throttle starts and hard acceleration;
•
Avoid hard or prolonged braking;
•
Do not ride for prolonged periods at sustained high speed; preferably ride the
motorcycle on varied routes with frequent, gentle acceleration and deceler-
ation;
•
Ride prudently to gradually gain familiarity with the motorcycle, testing pro-
gressively higher throttle apertures only as you gain confidence
CAUTION
THIS VEHICLE IS EQUIPPED WITH A SINGLE DISC DRY CLUTCH. IN CERTAIN
CONDITIONS, THE CLUTCH MAY EMIT A SLIGHT AND DISTINCTIVE ODOUR OF
CLUTCH MATERIAL. THIS IS NORMAL AND IS NOT INDICATIVE OF A FAULT.
CAUTION
THE FULL PERFORMANCE OF THE VEHICLE IS ONLY AVAILABLE AFTER THE
SERVICE AT THE END OF THE RUNNING IN PERIOD.
67
Advertisement
Table of Contents
