After adjusting:
NOTE
CHECK THAT THE LIGHT BEAM VERTICAL DIRECTION IS CORRECT.
Front direction indicators (04_24)
•
Rest the vehicle on its stand.
•
Loosen and remove screw (1).
NOTE
REMOVE THE PROTECTION GLASS WITH CAUTION SO AS NOT TO BREAK
THE FITTING TOOTH.
04_24
•
Remove the protective glass (2).
CAUTION
UPON REFITTING, POSITION THE PROTECTIVE GLASS CORRECTLY IN ITS
POSITION.
TIGHTEN THE SCREW (1) CAREFULLY AND MODERATELY TO AVOID DAM-
AGING THE PROTECTIVE GLASS.
•
Press bulb (3) slightly and turn it anticlockwise.
•
Pull the bulb (3) out of its fitting.
96