MOTO GUZZI California 1400 Custom Instruction Manual page 54

MGCT SYSTEM
When the motorcycle is switched on, the MGCT maintains the same system active or
system deactivated state in effect when the motorcycle was switched off.
If the MGCT system is active when the motorcycle is switched on, after the initial
instrument panel check cycle, the MGCT indicator lamp flashes until the vehicle speed
exceeds 5 Km/h (3.1 mph), after which it extinguishes.
If the MGCT system is deactivated when the motorcycle is switched on, after the initial
instrument panel check cycle, the MGCT icon extinguishes and remains off until the
rider manually activates the system.
If the MGCT indicator lamp is lit continuously, this indicates that a fault has been
detected and the system has been automatically deactivated.
In this case carry out the following operations:
- stop the vehicle;
- key OFF-ON;
- reactivate the system manually
- ride over 5 km/h (3.1 mph): the MGCT indicator lamp should extinguish
- the system is working correctly.
If the MGCT disabled indication remains:
NOTE
IF THIS OCCURS, CONTACT AN OFFICIAL Moto Guzzi dealer.
IF THE GAP FOR ONE OR BOTH SENSORS IS NOT WITHIN THE TOLERANCE
INDICATED BELOW, TAKE THE MOTORCYCLE TO AN official Moto Guzzi
DEALERSHIP
54