Advertisement
ASSEMBLY INSTRUCTIONS
STEP 1:
Open the carton and remove all contents.
Place the Main Frame (No. 1) on level
ground and ensure that you have a
clean, adequate work space.
Do not cut the Packing Belt (No. B) until
the assembly is complete!
STEP 2:
Attach Computer Bracket (No. 5) onto
the Upright Frames (No. 3) using 2
Bolts (No. 51) and 2 Lock Washers
(No. 64). Tighten and secure with Allen
wrench (No. 12).
STEP 3:
Pull up the Computer Bracket (No. 5)
and Upright Frames (No. 3) as the
arrow indicates.
Notice: When you pull up, make sure the
Upright Frames (No. 3)
against the wires in
(No. 3). Keep both hands on the
Upright
Computer Bracket (No. 5)
will not fall and cause injury.
5
do not press
Upright Frames
Frames
(No.
3)
so that they
and
Advertisement
