Download  Print this page

Maximize Battery Performance - Sanyo CLT-A5832 Instruction Manual

5.8 ghz cordless telephone with caller id & visual call waiting
Hide thumbs



The freedom that your cordless telephone can offer is fully dependent on the
performance of the rechargeable battery in the handset. To maximize the battery
performance, follow these guidelines:
Charge it for a full 12 hours
Before initial use of your new battery, charge it for 12 hours continuously. The
proper initial charging is very important to maximize the battery performance.
Keep the contacts clean
You can never fully recharge the battery if the contacts are dirty. Clean all the
contacts - two at the bottom of the handset and two in the base cradle -
periodically. Use a clean pencil eraser or superfine steelwool to clean the
charging contacts. Avoid touching the cabinet area of the phone, or scratches
may occur.
Refresh battery
If your battery seems to need recharging more often than usual, it may have lost
part of its charging capacity. To bring back its full capacity, try "refreshing" the
1. First discharge the battery by leaving the handset in TALK mode until Battery
Low indication turns on. (Disconnect the base from the telephone line, so that
your line is not busy all the time.)
2. Then charge it for 12 continuous hours.
3. Repeat the above once more. As your phone use a Ni-MH battery you are free
to leave your handset in the base charger for as long as you like, without
effecting the performance of the battery life.
sy5822 10 april.p65
2006/5/12, ¤U¤È 02:52


Table of Contents

  Also See for Sanyo CLT-A5832

  Related Manuals for Sanyo CLT-A5832

This manual is also suitable for: