HEADSET JACK AND BELT CLIP
Headset connection
For hands free conversation, connect the headset
(not included) to the HEADSET jack. The handset
earpiece and microphone are disabled when the
headset is connected. Press TALK to answer or
place a call while using the headset.
For purchasing, servicing or replacement please
contact our service center.
SANYO Canada Inc.
1-300 Applewood Cres.
Concord, Ont. L4K 5C7
(905) 760-9944
1-800-263-2244
www.sanyo.ca
Belt clip installation
• Attach the belt clip by inserting the sides of the
belt clip into the slots.
• Snap the ends of the belt clip into place.
LIGHT SIGNALS
The charge/in use & incoming call/in use indicator will change under the following
conditions.
CHARGE/IN USE LED on the base
Talking
Charging
Incoming call
Paging
Voice mail
INCOMING CALL/IN USE LED on the handset
Talking
Paging
Low battery
Incoming call
sy5822 10 april.p65
(Headset not included)
Lit steadily
Lit steadily
Flashes in same pattern as telephone ring
Flashes every 0.5 second
Flashes every 1 second
Lit steadily
Flashes every 1 second
Flashes every 15 seconds
Flashes in same pattern as telephone ring
22
22
2006/5/12, ¤U¤È 02:52