Advertisement
Quick Links
INSTALLATION INSTRUCTIONS FOR PART AX-ADGM01
GM LAN29 vehicles 2006-up
The AX-ADGM01 is designed to and MUST be used with the AX-ADBOX1 or AX-ADBOX2 (sold seperately).
Please refer to AX-ADBOX1 or AX-ADBOX2 for 16-pin connector instructions.
BUICK
Enclave
Lucerne
CADILLAC
Escalade
DTS
SRX
CHEVROLET
Avalanche
Cheyenne
Equinox
Express
Impala
Monte Carlo
Silverado (new body)
Suburban
Tahoe
Traverse
AX-ADGM01
APPLICATIONS
GMC
2007-up
Acadia
2006-2011
Savanna
Sierra
Yukon
2007-up* **
HUMMER
2006-2011*
2007-2009
H2
PONTIAC
2007-up* **
Torrent
2013**
SATURN
2007-2009
2008-up
Outlook
Vue
2006-up
2006-2007
SUZUKI
2007-up**
2007-up
XL-7
2007-up
2009-up
INTERFACE COMPONENTS
• 22-pin to 30-pin GM harness
• 4-pin to 4-pin resistor pad harness
TOOLS REQUIRED
• Cutting tool • Tape • Crimping tool
• Connectors (i.e. butt-connectors, bell caps, etc.)
2007-up
2008-up
* These vehicles have a digital amp option. Please refer
2007-up* **
to the RPO list located in the glove box and if code UQA
2007-up* **
or UQS appears you have a digital amplifier.
2008-2009*
** In 2012 and up if the vehicle is equipped with OE
navigation you must use the GMOS-LAN-07.
2007-2009
CAUTION: Metra recommends disconnecting the
2007-2009
negative battery terminal before beginning any
2008-2009
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
2007-2009
NOTE: Refer to the instructions included with the
aftermarket radio.
Advertisement
Related Manuals for Axxess ax-adgm01
Summary of Contents for Axxess ax-adgm01
- Page 1 • 22-pin to 30-pin GM harness • 4-pin to 4-pin resistor pad harness The AX-ADGM01 is designed to and MUST be used with the AX-ADBOX1 or AX-ADBOX2 (sold seperately). Please refer to AX-ADBOX1 or AX-ADBOX2 for 16-pin connector instructions. TOOLS REQUIRED APPLICATIONS •...
- Page 2 INSTALLATION INSTRUCTIONS FOR PART AX-ADGM01 Installing the Interface From the 16-pin harness with From the 30-way harness: • Connect the Violet/Black wire to Only make the following connections stripped leads if the vehicle contains a digitally the right rear negative wire of the •...
- Page 3 INSTALLATION INSTRUCTIONS FOR PART AX-ADGM01 Installing the Interface Video and RSE Harness • Connect the Green/Black wire to Backup camera harness OE Satellite (if equipped) Listed below are the functions of the the left rear negative wire of the steering wheel controls: Connect the Yellow RCA to the •...
- Page 4 INSTALLATION INSTRUCTIONS FOR PART AX-ADGM01 Testing the AX-ADGM01 Audio Level Adjustment 1. Start your vehicle and turn on the radio having • Turn the ignition on, and then turn the aftermarket radio on. audio playing. 2. Turn your aftermarket radio’s volume up •...