Advertisement
INTERFACE COMPONENTS
• AX-AM-AU91 interface
• AX-AM-AU91 harness
• 10-pin harness with RCA jacks
• 6-pin to 4-pin LVDS (video) cable
APPLICATIONS
AUDI
A3 (Typ 8V)*
2013-up A4 (Typ B9)**
* With 5.8" QVGA color display
** With MMI 7" color screen
AxxessInterfaces.com
Audi HDMI and Camera Interface
*Visit AxxessInterfaces.com for up-to-date vehicle specific applications.
INTERFACE FEATURES
• Provides front and rear camera inputs to the factory display screen
• Provides an HDMI input to the factory display screen *
• Micro "B" USB updatable
* The factory radio must have an AUX input
2015-up
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
AX-AM-AU91
I N S TA L L AT I O N I N S T R U C T I O N S
2013-up*
TABLE OF CONTENTS
Connections to be made .......................................2
Configuring the AX-AM-AU91 ................................3
Installing the AX-AM-AU91 ....................................4
User guide ..............................................................5
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 4/16/18 INSTAX-AM-AU91
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Axxess AX-AM-AU91
Summary of Contents for Axxess AX-AM-AU91
- Page 1 2013-up* TABLE OF CONTENTS Connections to be made ........2 *Visit AxxessInterfaces.com for up-to-date vehicle specific applications. Configuring the AX-AM-AU91 ........3 Installing the AX-AM-AU91 ........4 INTERFACE FEATURES User guide ..............5 • Provides front and rear camera inputs to the factory display screen •...
-
Page 2: Connections To Be Made
• If installing a front camera, connect the RCA jack labeled “Front Camera Video Input” (Connections Diagram) to the camera. • If adding an HDMI input to the factory display screen, connect an HDMI cable (Axxess part number AX-HDCABLE, sold separately), to the port on the AX-AM-AU91 labeled “HDMI IN”. -
Page 3: Configuring The Ax-Am-Au91
CONFIGURING THE AX-AM-AU91 Dip switch settings Remove the access door located on the top of the AX-AM-AU91 interface to access the dip switches. Dip 1 Dip 2 Dip 3 Dips 4 & 5 If the vehicle is equipped with a factory... -
Page 4: Installing The Ax-Am-Au91
• Connect the factory male factory connector into the female plug from the AX-AM-AU91 harness. • Connect the AX-AM-AU91 harness into the AX-AM-AU91 interface. • Remove the LVDS (video) cable from the DVD drive, then connect it to the AX-AM-AU91 interface (LVDS OUT). (Connection 2) •... -
Page 5: User Guide
USER GUIDE Button Configuration • The factory “Menu” and “Back” buttons will be used to operate the AX-AM-AU91. HDMI access Rear camera access • Select AUX-IN as a source from the factory radio. • The backup camera will automatically activate while the vehicle is in reverse gear. - Page 7 REV. 4/16/2018 INSTAX-AM-AU91...
- Page 8 AX-AM-AU91 I N S TA L L AT I O N I N S T R U C T I O N S IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
Need help?
Do you have a question about the AX-AM-AU91 and is the answer not in the manual?
Questions and answers