Setting Return To Standby Mode; Sleep Mode; Power Save Mode - Sanyo Power Vision SCP-8400 User Manual

Setting Return to Standby Mode

This feature allows you to select the way to return to
standby mode.
To set this feature:
1.
Select
2.
A message appears. Press OK (left softkey) to continue.
3.
Select Automatically or End Key.
Automatically to return to standby mode
automatically when no key is pressed for 30 seconds.
End Key to return to standby mode by pressing
Note:
End Key setting affects the battery's talk and standby times.

Sleep Mode

This feature helps conserve your battery power by restricting
the display.
To set this feature:
1.
Select
2.
Select Main LCD or Sub LCD.
3.
Select an option. (Select Off to deactivate this feature.)

Power Save Mode

This feature helps conserve your battery power by setting the
Main LCD and Sub LCD backlights to "Always Off,"and by
setting the Main LCD sleep mode to "after 30 sec."and the Sub
LCD sleep mode to "after 5 sec."
To set this feature:
1.
Select
2.
A message appears. Press OK (left softkey) to continue.
3.
Select On. (Select Off to deactivate this feature.)
Section 2B: Controlling Your Phone's Settings
> Settings > Display > Others > Return to Idle.
> Settings > Display > Others > Sleep Mode.
> Settings > Display > Power Save Mode.
.
61