Setting Return To Standby Mode; Setting Sleep Mode - Sanyo VI-2300 User Manual

Setting Return to Standby Mode

This feature allows you to select the way to return to standby mode.
To set this feature:
1.
Press
2. Select Settings and press
3. Select Display and press
4. Select Return to Idle and press
5. A message appears. Press OK (left softkey) to continue.
6. Select Automatically or End Key and press
Note:
End Key

Setting Sleep Mode

This feature helps conserve your battery power by restricting the
display when the phone is not in use.
To set sleep mode:
1.
Press
2. Select Settings and press
3. Select Display and press
4. Select Sleep Mode and press
5.
Select your desired option and press
Section 2B: Controlling Your Phone's Settings
to access the main menu.
Automatically to return to standby mode automatically
in 30 seconds.
End Key to return to standby mode by pressing
setting affects the battery's talk and standby times.
to access the main menu.
To deactivate this feature, select Off during step 5 above.
.
.
.
.
.
.
.
.
.
53