Setting Return To Standby Mode; Sleep Mode; Power Save Mode - Sanyo KATANA User Manual

Setting Return to Standby Mode

This feature allows you to select the way to return to standby mode.
To set this feature:
1.
Select
2.
A message appears. Press OK (left softkey) to continue.
3.
Select Automatically or End Key.
Note:
End Key setting affects the battery's talk and standby times.

Sleep Mode

This feature helps conserve your battery power by restricting the display.
To set sleep mode:
1.
Select
2.
Select Main LCD or Sub LCD.
3.
Select an option. (Select Off to deactivate this feature.)

Power Save Mode

This feature helps conserve your battery power by setting the Main LCD, Sub
LCD, and keypad backlights to "Always Off," and by setting the Main LCD
sleep mode to "after 30 sec." and the Sub LCD sleep mode to "after 5 sec.".
To set this feature:
1.
Select
2.
A message appears. Press OK (left softkey) to continue.
3.
Select On. (Select Off to deactivate this feature.)
56 Section 2B: Controlling Your Phone's Settings
> Settings > Display > Others > Return to Idle.
Automatically to return to standby mode automatically when
no key is pressed for 30 seconds.
End Key to return to standby mode by pressing
> Settings > Display > Others > Sleep Mode.
> Settings > Display > Power Save Mode.
.