Move The Selfview Pip; Why Move The Selfview - Cisco Webex DX70 User Manual

Camera Control

Move the Selfview PiP

1
Tap and hold the selfview image.
3
Drag the image to a new position, shown here is the
upper left corner.
D1510422 User Guide
Cisco Webex DX70, DX80
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
You will now see the alternate positions
available for the selfview image. Keep holding
the image.
4
Release the image by lifting your finger from the
screen. The selfview image has now assumed its
new position.
36

Why Move the Selfview?

Selfview shows what others see from
your video system. You will normally
use it to confirm that they see what
you want them to see.
The selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the selfview activated during the
meeting. This could, for example, be
to ensure that you remain seen on the
screen.
It may happen that the current position
of the selfview blocks important parts
of the image on your screen. You may
therefore want to move it.