Move The Selfview Pip - Cisco TelePresence DX70 User Manual

29
Camera

Move the Selfview PiP

Tap and hold the selfview image.
Drag the image to a new position,
shown here is the upper left corner.
You will now see the alternate positions
available for the selfview image. Keep holding
the image
Release the image by lifting your finger from
the screen. The selfview image has now
assumed its new position.
Why Move the Selfview?
Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the selfview activated during
the meeting. This could, for example,
be to ensure that you remain seen
on the screen.
It may happen that the current
position of the selfview blocks
important parts of the image on your
screen. You may therefore want to
move it.
D1510413 User Guide
Cisco TelePresence DX70, DX80
Produced: April 2016 for CE8.2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.