Move The Selfview Pip - Cisco EX60 User Manual

47 Camera

Move the Selfview PiP

Tap Selfview in the upper
right part of the screen, as
outlined to invoke the selfview,
if needed.
Once you reach the
location you want to
have it in, lift your finger
from the touchscreen.
Press and hold your
finger within the selfview
area.
The selfview will now assume
its new location.
As soon as it turns blue
drag the selfview to the
new location. Possible
locations are indicated by
gray rectangles.
Why Move the Selfview?
The Selfview shows what others see
from your video system. You will
normally use it to confirm that they
see what you want them to see.
The Selfview appears as a PiP
(Picture-in-Picture).
From time to time you may want to
have the Selfview activated during
the meeting. This could, for example,
be to ensure that a lecturer in your
room remains seen on the screen
despite constantly moving around.
It may happen that the current
position of the Selfview blocks
important parts of the image on your
screen. You may therefore want to
move it.
D1501611 User Guide Cisco TelePresence
EX60 and EX90
Produced: December 2014 for TC7.3
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.