Parameter Window Manual - ABB ES/S 4.1.2.1 User's Product Manual

ABB i-bus KNX
3.2.2 Parameter window
Manual
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
In the parameter window Manual, all the settings for manual operation can
be made.
For a detailed description of manual operation see
page 11.
Manual operation
Options: enable/disable via communication object
enabled
disabled
This parameter defines if the switch over between the operating states man-
ual operation and KNX operation is enabled or disabled via the button
the device.
enable/disable via communication object:
The communication object
is displayed. Manual operation can be enabled or disabled via the bus
with this communication object.
Telegram value
enabled: With this selection, the outputs can be directly controlled using
the manual pushbuttons.
disabled: With this selection, manual operation is disabled. The outputs
can no longer be operated via the manual pushbuttons.
Manual
Enable block manual operation, page 41,
0 = button enabled
1 = button disabled
operation,
on
23