Parameters - ABB ES/S 4.1.2.1 User's Product Manual

ABB i-bus KNX
3.2

Parameters

© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
The parameterization of the Electronic Switch Actuator is implemented using
the Engineering Tool Software ETS from version ETS3.0f or higher.
The application program is available in the ETS3 at
ABB/Heating/Ventilation/Air conditioning/Electronic Switch Actuator.
The following chapter describes the parameters of the ES/S 4.1.2.1 using
the parameter windows. The parameter window features a dynamic struc-
ture, so that further parameters or communication objects may be enabled
depending on the parameterization and the function of the outputs.
The default values of the parameters are underlined, e.g.:
Options: yes
no
Note
However, as the functions for all outputs are identical, only the functions
of output A will be described in the following.
19