General; Using The Product Manual - ABB ES/S 4.1.2.1 User's Product Manual

ABB i-bus KNX
1

General

1.1 Using the
product manual
© 2010 ABB STOTZ-KONTAKT GmbH
General
The Electronic Switch Actuator ES/S 4.1.2.1 is a modular installation device
with a module width of 4 space units in ProM Design for installation in the
distribution board. The device features four semiconductor outputs for con-
trol of thermoelectric valve drives (e.g. TSA/K) for room temperature control
in heating and cooling systems. The power supply for the valve drives can
be 24...230 V AC/DC.
The connection to the ABB i-bus is established using the front side bus
connection terminal.
The assignment of the physical addresses as well as the parameterization
is carried out with Engineering Tool Software ETS from version ETS3.0f
or higher.
This manual provides you with detailed technical information relating to
the function, installation and programming of the ABB i-bus
Switch Actuator ES/S 4.1.2.1.
The application of the device is described using examples.
This manual is divided into the following sections:
Chapter 1 General
Chapter 2 Device technology
Chapter 3 Commissioning
Chapter 4 Planning and application
Chapter A Appendix
®
KNX Electronic
3