Commissioning; Overview; Conversion Of Previous Application Programs; Procedure - ABB ES/S 4.1.2.1 User's Product Manual

ABB i-bus KNX
3

Commissioning

3.1

Overview

3.1.1 Conversion of previous
application programs
3.1.1.1

Procedure

© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
The application program Switching Valve Drive 4f 1A/1.2 is available for
the Electronic Switch Actuator. Programming requires ETS3 or higher.
®
For ABB i-bus KNX devices from ETS3 or higher, it is possible to assume
the parameter settings and group addresses from earlier application pro-
gram versions.
For the market launch of the Electronic Switch Actuator, there is no previous
version of the application program currently available. However, the conver-
sion program can still be useful to transfer the parameterization settings and
group addresses of one device to another of the same type.
Import the current VD3 file into ETS3 and add a product with the current
application program to the project.
After you have parameterized a device, you can transfer the settings to
a second device. For this purpose, the devices must already be avail-
able in the ETS project.
Right click on the product and select Convert in the context menu for this
purpose.
Subsequently the required settings are undertaken in
the dialog Convert.
Finally, exchange the physical address and delete the old
Should you wish to only copy individual channels within a device, use
the function Copy and exchange, page 16.
device.
15