Parameter Window A: General Selection: Valve Drive - ABB ES/S 4.1.2.1 User's Product Manual

ABB i-bus KNX
3.2.3 Parameter window
A: General
Selection: Valve drive
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
In this parameter window, the general settings for output A are undertaken.
The following described parameters are shown if in parameter window
A: General the Valve drive (thermoelectric) mode has been selected.
Note
However, as the functions for all outputs are identical, only the functions
of output A will be described.
Operation mode
Options: none
Valve drive (thermoelectric)
none: The output is deactivated with this selection.
Note
The outputs can however be operated via the manual pushbuttons in
the default delivery state.
After the first download, the outputs, for which the option none has been
set, can no longer be operated via the manual pushbuttons.
26