Supermicro SuperServer E300-9D User Manual page 62

SuperServer E300-9D User's Manual
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
PXE boot Wait Time
Use this option to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on your keyboard to change the value. The default setting is 0.
Media detect count
Use this option to specify the number of times media will be checked. Press "+" or "-" on
your keyboard to change the value. The default setting is 1.
Super IO Configuration

Super IO Chip AST2500
 Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable the onboard serial port specified by the user. The options are
Enabled and Disabled. Enable this feature for the next two features to display and only
the Change Settings feature is available for configuration.
Device Settings
This feature displays the base I/O port address and the Interrupt Request address of a
serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select Auto for the BIOS to automatically assign the base I/O and IRQ address to
a serial port specified. The options are Auto, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
 Serial Port 2 Configuration
Serial Port 2
Select Enabled to enable the onboard serial port specified by the user. The options are
Enabled and Disabled. Enable this feature for the next two features to display and only
the Change Settings feature is available for configuration.
Device Settings
This feature displays the base I/O port address and the Interrupt Request address of a
serial port specified by the user.
62