Connections to the Laser Head
© 2018 Cutting Edge Optronics, Inc.
The filter may be attached to the back of the chiller, customer's equipment or a
wall using the provided L-bracket.
NOTE:
Threaded hose barbs and adapters should have threads wrapped 3-4 times with
Teflon tape.
Figure 4-4 depicts the chiller with connected water hoses on a Patara II laser.
Figure 4-4. Chiller Assembled with Water Hoses and Filter
Figure 4-5 depicts the connectors on the rear panel of the Patara Laser. All of the
connectors are clearly labeled.
Chapter Four: Installation and Operation
27
Patara I and II Laser User Manual