Table of Contents
Advertisement
Patara Laser
© 2018 Cutting Edge Optronics, Inc.
The Patara laser head measures 24" x 8" x 6" (not including the connectors at the
rear of the laser). The laser emission indicator is located on the side of the unit.
The output window is positioned 76.2 mm (3") from the bottom of the Patara laser
and 99.7 mm (3.93") from the side with the emission indicator.
Figure 3-1. Patara Front View
The rear panel of the Patara laser has connectors for the cable connection to the
eDrive Nitro. The coolant in and coolant out ports are also found on the back
panel.
Gen I
Figure 3-2. Patara Rear View
The alignment openings are located on both front and back panels and are sealed
by screws to prevent emission during normal operation. The service technician
can remove the screws and use a HeNe laser to aid alignment.
Gen II
12
Chapter 3: System Details
Patara I and II Laser User Manual
Advertisement
Table of Contents
