Table of Contents
Advertisement
Available languages
Available languages
6
Maintenance
6.1
Storage
1.
Rechargeable battery
Charging the battery completely takes approx. 7 hours. The battery is fully charged
when the light stops glowing. The battery life is up to 8 hours if fully charged.
2.
Cleaning the components
Camera cable
To clean the camera cable, use a piece of gauze or other material dampened by some
neutral cleaning agent to wipe the cable. Then dampen the piece of gauze with clear
water to clean the probe. Wipe the cable dry.
Camera
Hold the inflexible end of the camera cable and use some gauze or a cotton swab to
wipe off any dirt or water. (Fig. 23)
For ideal results, use commercially available pure ethanol.
Case
Wipe the case around the display with a soft cloth dampened with clear water. Then dry
the case with a clean and dry cloth.
3.
Storage precautions
•
Store the device at normal room temperature and air humidity.
•
Straighten the camera probe while placing in in the carrying case.
•
Store the equipment in a clean, dry and stable place.
Fig. 23
© PCE Instruments
36
Advertisement
Table of Contents
