Table of Contents
Advertisement
ETC Installation Guide
ColorSource PAR Pearl v1.7
Quick reference
DMX control channels
DMX
Channel
1
2
3
4
*Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase
the strobe rate from 1 per second up to 33 per second.
Error codes
There are three error codes that may be shown on the user interface.
•
with the color calibration. The fixture will need to be returned to the
ETC factory; contact your local dealer to set up a repair.
•
fixture has gone into over-temperature protection mode to avoid
damaging the fixture. Once the fixture has self-cooled, the error will
automatically clear.
•
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC.
ColorSource PAR Pearl v1.7
(Variable
Color Temperature)
Intensity
Color temperature
: Screen toggles between
: Screen toggles between
: Screen toggles between
Page 16 of 16
(Direct)
Intensity
Warm white
Cool white
Strobe*
and
to indicate a problem
and
to indicate that the
and
(1 Channel)
Intensity
to indicate that the
ETC
Advertisement
Table of Contents
Need help?
Do you have a question about the ColorSource PAR Pearl and is the answer not in the manual?
Questions and answers