Table of Contents
Advertisement
6. Normal Operation
6.0 Monitor/Operation
Perform normal operation from the Management screen.
Display the Management screen by clicking the Monitor/Operation function select button (top left-hand side of screen), then
selecting the operation object from the display unit buttons (top right-hand side of screen). The "Air-conditioning charge display"
is only displayed when there is a charge function.
(1) Select the function
When the Monitor/Operation function select button is clicked, the monitor/
operation screen opens.
(2) Select the operation object
[Procedure]
When group is the object
Click the Floor button in display units.
Select the distribution floor of the object group from the floor switching but-
tons (left-hand side of screen).
The floor is displayed on the monitor/operation screen.
Click the object group icon on the displayed floor.
When whole floor is the object
Click the Floor button in display units.
Select the object floor from the floor switching buttons (left-hand side of
screen).
The object floor is displayed on the monitor/operation screen.
Click the Floor batch process bottom at the bottom right-hand corner of the
screen.
When block is the object
Click the Block button in display units.
All the blocks are displayed on the monitor/operation screen.
Select the object block from the monitor/operation screen.
When whole building is the object
Click the Whole building button in display units.
Whole building is displayed on the monitor/operation screen.
Click the Building batch process button at the bottom right-hand corner of
the screen.
When system equipment, IFU, or G/W is the object
Click the System equipment button in display units.
IFU, G/W is displayed on the monitor/operation screen.
Select the G/W connected to the object equipment with the G/W select
button ( ).
The system equipment of the selected G/W is displayed in the
monitor/operation screen.
Select the object system equipment from the monitor/operation screen.
Function select
- Monitor/Operation
- History
- Filter reset
- Cumulative time
- Energy monitoring
Display units
- System equipment
- Floor
- Whole building
- Block
10
Function selection
Normal operation screen
Display units
Advertisement
Table of Contents
