Decommissioning / Storage; Shutdown; Storage Conditions; Hazard Notes - Gema MagicControl 4.0 Operating Instructions Manual

Decommissioning / Storage

Shutdown

Storage conditions

MagicControl 4.0 (CM40)
Rev. 00 08/17
1. End the coating procedure
2. Switch off the control unit
The adjustments for high voltage, powder output volume and
electrode rinsing air remain stored.

Hazard notes

There is no danger to personnel or the environment if the unit is stored
properly.

Type of storage

For safety reasons, the product should only be stored in a horizontal
position

Storage duration

If the physical conditions are maintained, the unit can be stored
indefinitely.

Space requirements

The space requirements correspond to the size of the product.
There are no special requirements concerning distance to neighboring
equipment.

Physical requirements

Storage must be inside a dry building at a temperature between +5 and
+50 °C. Do not expose to direct sunlight!
Decommissioning / Storage  75