Operating Data Management (Lm); Machine Utilization - Gema MagicControl 4.0 Operating Instructions Manual

Operating data management (LM)

MagicControl 4.0 (CM40)
Rev. 00 08/17
Climatic ambient conditions
Air pressure (operation)
Temperature (operation)
Temperature (storage / transport)
Air humidity
Condensation
Whilst the operating panel has a robust design, the built-in components
are sensitive to excessive vibrations and/or shocks.
The operating panel must be protected from mechanical loads outside its
intended use.
The operating panel may only be transported in the appropriate
packaging and in the correct manner.
Before recommissioning
During storage and transport in cold weather, and in the event of extreme
temperature differences, ensure that no moisture is deposited on or inside
the unit (condensation).
If condensation is present, the unit may only be switched on after it is fully
dry.
The display shows the hours (h) with a definition of 1/100 h = 0.6 mins.
1. Press the key
The following page is displayed:
Fig. 61:

Machine utilization

1. Press the key
795 - 1080 hPa
max. 2000 m ü. NHN
± 0 – +50 °C (+32 – +122 °F)
-20 – + 60 °C (-4 – +140 °F)
Relative air humidity 10 - 95 %
Non-condensing
Maintenance / Repairs  63