Reasonably Foreseeable Misuse; Powder Circuit; Typical Characteristics - Gema MagicControl 4.0 Operating Instructions Manual

Reasonably foreseeable misuse

Powder circuit

Fig. 2: Example of a powder coating plant

Typical characteristics

MagicControl 4.0 (CM40)
Rev. 00 08/17
–
Operation without the proper training
–
Use in connection with unauthorized coating devices or components
The control monitors and controls the powder circuit in coating plants. The
powder circuit depends on the plant layout and configuration.
An overview of the effective powder circuit is shown in the enclosed wiring
diagram.
1 Booth
2 Cyclone separator
3 Sieve
4 Dense phase conveyor
–
Powder coating in 2 operating modes
–
Cleaning in cleaning mode
–
User administration and language management
–
Recipe management / application data management
–
Configuration and parameter data management
–
Alarm handling
–
Diagnostic functions
–
Operating data acquisition
–
Control and regulation of height, length and depth detection
–
Storage of operating data (e.g.: running time of guns, axes, fans) on
the SD cards
–
Data exchange with higher-level plant controls (option)
–
PC-based central control module for booths, gun controls, axes and
powder supply
5 After Filter
6 Refuse container
7 OptiCenter
8 Automatic guns
Product description  13