Usb Recording - Triax MCT 080 User Manual

FIELD METERS MCT 080 / 081 / 082 / 085 USER MANUAL
You can choose:
mono : only one scan is made

0mn : the total scan starts again as soon as it is finished

1mn : the scan starts every minute

10mn : the measurement scan starts every 10 minutes

1h : the scan starts every hour

8h : the scan starts every 8 hours

24h : the scan starts every 24 hours

15.3

USB recording

You can save these measures on an USB stick :
Press opens a CSV file is a stick is detected.
The save starts after browsing of all setups.
This is when the date and time are recorded.
The previous « Mode » key allows you to select the duration between two records of the list.
BERi, BERo et PER are generic terms (frequently used)
BERi = BER in = inner BER
BERo = BER out = outer BER
PER = packet error rate
Important:
A bargraph under the Measurement map allows you to track the evolution of the scan.
The background color of this bargraph shows you that a complete scan has been made
(for a save, for example):
In case of mixed measurement map (terrestrial+satellite), the satellite remote power
supply has priority (the terrestrial remote power supply is ignored).
first BER treated by the demodulator (BER channel, CBER, LDPC)
last BER treated by the demodulator (BER Viterbi, VBER, BCH)
non-proofread packet, lost packet, wrong packet (UNC, PER)
- red: the measurement map has not been totally scanned yet
- green: the measurement map has been totally scanned
p.
87